3 Yard Front-Load Commercial Container
Overview
Rehrig Pacific Commercial Containers are a lightweight solution that is on average 57% lighter than traditional metal dumpsters. This innovative alternative offers the advantage of significantly reduced weight with a noise reduction of approximately two-thirds compared to servicing metal containers, providing a quieter waste handling experience.
Product Specifications
Product Details
| Specifications | IN/LB | CM/KG |
|---|---|---|
| Load Rating | 2,000 | 907 |
| Overall Depth (D) | 49.0 | 124.5 |
| Overall Width (W) | 83.5 | 212 |
| Overall Height with Lids (H) | 54.0 | 137 |
| Caster Height | 7.0 | 17.8 |
| Assembled Weight | 245 | 111 |
| 53' Trailer Quantity | 36 |
| Decoration Areas | WIDTH (IN) | HEIGHT (IN) |
|---|---|---|
| Center Brand (B1) | 24.0 | 18.0 |
| Front Side Brand (B2) | 10.0 | 8.0 |
- Minimum 0.25" thick solid resin wall stock to enhance long-term durability, reduce potential for wall and enclosure damage, and minimize ongoing maintenance
- Lightweight - 1/3 less weight than comparable metal containers makes maneuvering easy with less effort and noise
- Average of 40% higher strength-to-weight ratio across push/pull sizes vs. competing plastic designs
- Average of 57% lighter than metal containers without sacrificing load rating to help reduce potential for push/pull injuries
- Replaceable pocket sleeves provide added side wall thickness and protection against puncturing by fork tines
- Wide, tapered sleeve with integrated bumpers provides a broader target for drivers and may reduce service time by an average of 15-20 seconds per lift; Sleeve bumpers provide added protection for front panels and against repeated impacts
- Molded beams provide support and stepped sidewalls provide stiffness to avoid bottom sagging and bowing; Heavily reinforced top rim
- Molded-in caster rings with quick release casters prevent "pop-through's" mitigate leaking/ seepage, and allow for quick in-field caster/skid changes
- High-impact, UV stabilized, 100% recyclable polyethylene resin won't deteriorate like metal in damp conditions
- Tested in extreme heat and cold conditions to improve versatility and boost longevity
- Dent resistant and repairable; Easy in-field graffiti removal
- Nestable for shipping, storage, deliveries, and removals
- Customer Friendly - 2/3 quieter than servicing metal containers to reduce noise complaints and enhance customer experience
- Smooth areas on front of container to enable branding graphics or labels to better adhere to the container body